-
Max load capacity – 75kg evenly distributed across both bars
Note: Max total load capacity of 90kg when fitted with both vehicle and canopy roof racks -
For use on 6 stud vehicles only with Widebody fenders only. Must use standard 265/65 R17 Tyre.
Must also order Wheel Ornaments, see below for applicable part number.
* Must order 42661-0KQ70 Tyre Label, when fitted to any vehicle that does not come standard with 17″ wheels
Any vehicles with steel wheels must order six OE nuts (90942-01109) to replace the standard vehicle’s nuts. -
For use on 6 stud vehicles only with Widebody fenders only. Must use standard 265/65 R17 Tyre.
Must also order Wheel Ornaments, see below for applicable part number.
* Must order 42661-0KQ70 Tyre Label, when fitted to any vehicle that does not come standard with 17″ wheels
Any vehicles with steel wheels must order six OE nuts (90942-01109) to replace the standard vehicle’s nuts. -
For use on 6 stud vehicles only with Widebody fenders only. Must use standard 265/60 R18 Tyre.
* Must order 42661-0KQ90 Tyre Label, when fitted to any vehicle that does not come standard with 18″ wheels.
Any vehicles with steel wheels must order six OE nuts (90942-01109) to replace the standard vehicle’s nuts. -
Does not include battery. Battery must be no more than 20kgs, 190mm high,176mm wide & 277mm Long. Suits 4×4 and Hi-Rider diesel variants only
-
Not winch compatible.
Must order Bullbar Patch Harness (PZQ8589235 or PZQ8589245), see below for applicability.Max. limits for antenna installation-
Base OD: 42mm; Mass: 1.4kg, Height: 1.2m (RH) or 0.73m (LH).
Due to TSS zone, must fit to outboard area only. -
Winch Cradle included with Bullbar
Must order Bullbar Patch Harness (PZQ8589235 or PZQ8589245), see below for applicability.Max. limits for antenna installation-
Base OD: 42mm; Mass: 1.4kg, Height: 1.2m (RH) or 0.73m (LH).
Due to TSS zone, must fit to outboard area only. -
Required when fitting Compact Size LED Light Bar on Alloy Bullbars
Images are for display purposes only and may differ from actual product.
-
Applicable for Nudgebars only.
Required when fitting Comet FF450 driving lights to vehicles with fuse box fitted. -
Dual Cab, AT, Front & Rear
-
2-head kit.
Applicable to Narrow and Wide Body variants, except for Rugged X.
Compatible with Nudgebar.
Not compatible with Bullbar. -
2-head kit.
Applicable to Narrow and Wide Body variants, except for Rugged X.
Compatible with Nudgebar.
Not compatible with Bullbar. -
2-head kit.
Applicable to Narrow and Wide Body variants, except for Rugged X.
Compatible with Nudgebar.
Not compatible with Bullbar. -
2-head kit.
Applicable to Narrow and Wide Body variants, except for Rugged X.
Compatible with Nudgebar.
Not compatible with Bullbar. -
2-head kit.
Applicable to Narrow and Wide Body variants, except for Rugged X.
Compatible with Nudgebar.
Not compatible with Bullbar. -
4-head kit.
Applicable to Wide Body variants, except for Rugged X.
Not compatible with Bullbar or Nudgebar. -
4-head kit.
Applicable to Wide Body variants, except for Rugged X.
Not compatible with Bullbar or Nudgebar. -
4-head kit.
Applicable to Wide Body variants, except for Rugged X.
Not compatible with Bullbar or Nudgebar. -
4-head kit.
Applicable to Wide Body variants, except for Rugged X.
Not compatible with Bullbar or Nudgebar. -
4-head kit.
Applicable to variants with Alloy Bullbars. -
4-head kit.
Applicable to variants with Premium Steel Bullbars.
Not applicable with Commercial Steel Bullbars. -
Required when fitting Full Size LED Light Bar on Alloy Bullbars
-
Cab-chassis tray variants only. Requires harness: PZQ6000460
When fitting on Tray with Trundle Drawers, must also purchase Accessory Bracket PZQ84AD003. -
Required when fitting LED Light Bar on Steel Bullbars.
-
Required when fitting driving lights (Comet FF 450 or LED Light Bar) on Nudgebars.
-
Cab Chassis – Tray variants only (without Trundle Drawer)
For Tray Body with Trundle Drawers, order 2-head kit instead (PZQ9789020) -
For Pickup variants, except as noted
* Applicable to Tray Body with Trundle Drawers variants -
Must be installed with an Alloy or Steel Bullbar.
-
Required to fit reverse camera PZQ9089012 on Tray with Trundle Drawers
-
- Compatibility: 2020 – Present Toyota HiLux Double Cab Chassis SR 4×4 – 6AT Diesel, 2020 – Present Toyota HiLux Double Cab Chassis SR 4×4 – 6MT Diesel, 2020 – Present Toyota HiLux Double Cab Chassis SR5 4×4 – 6AT Diesel, 2020 – Present Toyota HiLux Double Cab SR 4×2 Hi-Rider – 6AT Diesel (J-Deck), 2020 – Present Toyota HiLux Double Cab SR 4×2 Hi-Rider – 6MT Diesel (J-Deck), 2020 – Present Toyota HiLux Double Cab SR 4×4 – 6AT Diesel (J-Deck), 2020 – Present Toyota HiLux Double Cab SR 4×4 – 6MT Diesel (J-Deck), 2020 – Present Toyota HiLux Double Cab SR+ 4×4 – 6AT Diesel with Alloys & Nav, 2020 – Present Toyota HiLux Double Cab SR+ 4×4 – 6MT Diesel with Alloys & Nav, 2020 – Present Toyota HiLux Double Cab SR5 4×2 Hi-Rider – 6AT Diesel, 2020 – Present Toyota HiLux Double Cab SR5 4×4 – 6AT Diesel, 2020 – Present Toyota HiLux Double Cab SR5 4×4 – 6MT Diesel
-
Not compatible with leather seats
-
Can only be fitted with accessory Side Steps AND Steel Bull Bar
-
Double Cab & Extra Cab – 4×4 and Hi-Rider only. Compatible with side rail PZQ4389020. Requires removal of OE sidestep/rock rails
Showing 1–48 of 72 results