Showing 1–48 of 88 results
Max load capacity – 75kg evenly distributed across both bars
Note: Max total load capacity of 90kg when fitted with both vehicle and canopy roof racks
For use on 6 stud vehicles only with Widebody fenders only. Must use standard 265/65 R17 Tyre.
Must also order Wheel Ornaments, see below for applicable part number.
* Must order 42661-0KQ70 Tyre Label, when fitted to any vehicle that does not come standard with 17″ wheels
Any vehicles with steel wheels must order six OE nuts (90942-01109) to replace the standard vehicle’s nuts.
For use on 6 stud vehicles only with Widebody fenders only. Must use standard 265/65 R17 Tyre.
Must also order Wheel Ornaments, see below for applicable part number.
* Must order 42661-0KQ70 Tyre Label, when fitted to any vehicle that does not come standard with 17″ wheels
Any vehicles with steel wheels must order six OE nuts (90942-01109) to replace the standard vehicle’s nuts.
For use on 6 stud vehicles only with Widebody fenders only. Must use standard 265/60 R18 Tyre.
* Must order 42661-0KQ90 Tyre Label, when fitted to any vehicle that does not come standard with 18″ wheels.
Any vehicles with steel wheels must order six OE nuts (90942-01109) to replace the standard vehicle’s nuts.
Does not include battery. Battery must be no more than 20kgs, 190mm high,176mm wide & 277mm Long. Suits 4×4 and Hi-Rider diesel variants only
Not compatible with Over Rail Ute Liners (PC3500K02C or PC3500K01L).
Not compatible with Side Utility Box (PW3B50K000) if Box is fitted on Passenger side.
If also fitting Ute Liner, Ute Liner must be fitted first.
Not winch compatible.
Must order Bullbar Patch Harness (PZQ8589235 or PZQ8589245), see below for applicability.
Max. limits for antenna installation-
Base OD: 42mm; Mass: 1.4kg, Height: 1.2m (RH) or 0.73m (LH).
Due to TSS zone, must fit to outboard area only.
Winch Cradle included with Bullbar
Must order Bullbar Patch Harness (PZQ8589235 or PZQ8589245), see below for applicability.
Max. limits for antenna installation-
Base OD: 42mm; Mass: 1.4kg, Height: 1.2m (RH) or 0.73m (LH).
Due to TSS zone, must fit to outboard area only.
Max load capacity – 90kg evenly distributed across both bars
Note: Max total load capacity of 90kg when fitted with both vehicle and canopy roof racks
Note: Vehicle roof rack height and canopy roof rack height misalignment is intentional
Required when fitting Compact Size LED Light Bar on Alloy Bullbars
Images are for display purposes only and may differ from actual product.
Applicable for Nudgebars only.
Required when fitting Comet FF450 driving lights to vehicles with fuse box fitted.
60 min fitment time when fitted with uteliner
Dual Cab, AT, Front & Rear
2-head kit.
Applicable to Narrow and Wide Body variants, except for Rugged X.
Compatible with Nudgebar.
Not compatible with Bullbar.
2-head kit.
Applicable to Narrow and Wide Body variants, except for Rugged X.
Compatible with Nudgebar.
Not compatible with Bullbar.
2-head kit.
Applicable to Narrow and Wide Body variants, except for Rugged X.
Compatible with Nudgebar.
Not compatible with Bullbar.
2-head kit.
Applicable to Narrow and Wide Body variants, except for Rugged X.
Compatible with Nudgebar.
Not compatible with Bullbar.
2-head kit.
Applicable to Narrow and Wide Body variants, except for Rugged X.
Compatible with Nudgebar.
Not compatible with Bullbar.
4-head kit.
Applicable to Wide Body variants, except for Rugged X.
Not compatible with Bullbar or Nudgebar.
4-head kit.
Applicable to Wide Body variants, except for Rugged X.
Not compatible with Bullbar or Nudgebar.
4-head kit.
Applicable to Wide Body variants, except for Rugged X.
Not compatible with Bullbar or Nudgebar.
4-head kit.
Applicable to Wide Body variants, except for Rugged X.
Not compatible with Bullbar or Nudgebar.
4-head kit.
Applicable to variants with Alloy Bullbars.
4-head kit.
Applicable to variants with Premium Steel Bullbars.
Not applicable with Commercial Steel Bullbars.
Required when fitting Full Size LED Light Bar on Alloy Bullbars
Standard LED and Central Locking. Compatible with J-Deck dust defence kit (PZQ7089J13) and ute liner
Standard LED and Central Locking. Compatible with J-Deck dust defence kit (PZQ7089J13) and ute liner
Standard LED and Central Locking. Compatible with J-Deck dust defence kit (PZQ7089J13) and ute liner
Standard LED and Central Locking. Compatible with J-Deck dust defence kit (PZQ7089J13) and ute liner
Required when fitting LED Light Bar on Steel Bullbars.
Required when fitting driving lights (Comet FF 450 or LED Light Bar) on Nudgebars.
Showing 1–48 of 88 results