-
Does not include battery. Battery must be no more than 20kgs, 190mm high,176mm wide & 277mm Long. Suits 4×4 and Hi-Rider diesel variants only
-
Not winch compatible.
If fitted on WorkMate grades, must fit genuine accessory sidesteps or tray (or similar) to meet regulations.
Must order Bullbar Patch Harness (PZQ8589235).Max. limits for antenna installation-
Base OD: 42mm; Mass: 1.4kg, Height: 1.2m (RH) or 0.73m (LH).
Due to TSS zone, must fit to outboard area only. -
Required when fitting Compact Size LED Light Bar on Alloy Bullbars
Images are for display purposes only and may differ from actual product.
-
Applicable for Nudgebars only.
Required when fitting Comet FF450 driving lights to vehicles with fuse box fitted. -
2-head kit.
Applicable to Narrow and Wide Body variants, except for Rugged X.
Compatible with Nudgebar.
Not compatible with Bullbar. -
2-head kit.
Applicable to Narrow and Wide Body variants, except for Rugged X.
Compatible with Nudgebar.
Not compatible with Bullbar. -
2-head kit.
Applicable to Narrow and Wide Body variants, except for Rugged X.
Compatible with Nudgebar.
Not compatible with Bullbar. -
2-head kit.
Applicable to Narrow and Wide Body variants, except for Rugged X.
Compatible with Nudgebar.
Not compatible with Bullbar. -
2-head kit.
Applicable to Narrow and Wide Body variants, except for Rugged X.
Compatible with Nudgebar.
Not compatible with Bullbar. -
- Compatibility: 2020 – Present Toyota HiLux Single Cab Chassis SR 4×2 Narrow Body – 6AT Diesel, 2020 – Present Toyota HiLux Single Cab Chassis SR 4×2 Narrow Body – 6MT Diesel
4-head kit.
Applicable to Narrow Body variants.
Not compatible with Nudgebar. -
4-head kit.
Applicable to Narrow Body variants.
Not compatible with Nudgebar. -
4-head kit.
Applicable to Narrow Body variants.
Not compatible with Nudgebar. -
4-head kit.
Applicable to Narrow Body variants.
Not compatible with Nudgebar. -
4-head kit.
Applicable to Narrow Body variants.
Not compatible with Nudgebar. -
4-head kit.
Applicable to variants with Alloy Bullbars. -
4-head kit.
Applicable to variants with Premium Steel Bullbars.
Not applicable with Commercial Steel Bullbars. -
Required when fitting Full Size LED Light Bar on Alloy Bullbars
-
Cab-chassis tray variants only. Requires harness: PZQ6000460
When fitting on Tray with Trundle Drawers, must also purchase Accessory Bracket PZQ84AD003. -
Required when fitting LED Light Bar on Steel Bullbars.
-
Required when fitting driving lights (Comet FF 450 or LED Light Bar) on Nudgebars.
-
Cab Chassis – Tray variants only (without Trundle Drawer)
For Tray Body with Trundle Drawers, order 2-head kit instead (PZQ9789020) -
Must be installed with an Alloy or Steel Bullbar.
-
Required to fit reverse camera PZQ9089012 on Tray with Trundle Drawers
-
Not compatible with leather seats
-
Not compatible with leather seats
-
Can only be fitted with accessory Side Steps AND Steel Bull Bar
-
Single Cab Hi-Rider and 4×4 only. Compatible with side rail PZQ4389020.
-
Required when fitting Front Recovery Points to accessory Steel Bull Bar
-
Images are for display purposes only and may differ from actual product.
-
*Suits Single Cab variants fitted with standard GPA Tray Body (2550mm)
Suits Extra Cab and Dual Cab – Cab Chassis variants fitted with tray body.
^Use long tongue towbar if tub-delete conversion/tray body is fitted.
Towbar design maximum capacity – 3500kg. Refer to vehicle Owner’s Manual for vehicle specific towing capacities -
*Suits Single Cab variants fitted with Narrow GPA Tray Body (2400mm)
If tub-delete conversion/tray body is fitted to pick up variants, use long tongue towbar instead (PZQ6489173).
Towbar design maximum capacity – 3500kg. Refer to vehicle Owner’s Manual for vehicle specific towing capacities. -
Suits vehicles fitted with battery terminal and fuse box kit.
Images are for display purposes only and may differ from actual product.
-
Suits vehicles fitted with battery terminal and fuse box kit
-
Suits vehicles fitted with battery terminal and fuse box kit
Showing 1–48 of 60 results